Aerosoft/Toliss A346 Light Mod

VC and external light mod for the a346, now with realistic projector-style front panel flood lights.  unfortunately, LCD brightness and integral light knobs are not mapped to light potentiometers in the model so cannot modulate brightness with the knob.  Beacon effect is also baked into the model which is affected by distance (LOD) but this mod adds normal .fx beacons to overcome the issue (will see out of sync/overlapping beacons when up close to the model).

v2.3
1) softened projector flood light intensity transition

v2.2
1) tweak center floods (L & R same size)
2) add flood light bounce near the sources

v2.0
1) projector-style front panel flood lights

v1.1
1) interior light tweaks (integral light illumination around the vc, etc.)
2) brighter landing lights
3) taxi light cone adjusted
4) strobes reworked
5) smaller white nav lights
6) fix ghost beacons for fs24

v1.0
1) flood light throw pattern and color fixed
2) LCD panel light emission under and around the glareshield for the volumetric effect (cannot be made responsive to panel brightness knob setting)
3) flood/integral light bounce to overhead, pedestal, etc.
4) tweak nav lights
5) reworked cockpit reading/map/flood lights
6) beacons are now visible from far distance/zoom out view, light bounce on wings added

the ambient light levels in this mod were set using the Pimax Crystal Super QLED (local dimming=on) and a Samsung 4k monitor in full screen mode in a dark room.     

To install, place "za340-600_light_mod_fs20" folder in the /MSFS2020/Community folder. 
To install, place "za340-600_light_mod_fs24" folder in the /MSFS2024/Community folder. 

